Get your server issues fixed by our experts for a price starting at just 25 USD/Hour. Click here to register and open a ticket with us now!

Author Topic: TCP Header Fields: An Overview  (Read 2434 times)

0 Members and 1 Guest are viewing this topic.

Vineesh K P

  • Guest
TCP Header Fields: An Overview
« on: April 28, 2018, 02:33:43 pm »
 TCP segments are sent as internet datagrams. The Internet Protocol header carries several information fields, including the source and destination host addresses. A TCP header follows the internet header, supplying information specific to the TCP protocol. This division allows for the existence of host level protocols other than TCP.

Take a look at the TCP header format below.



Source Port: 16 bits

    The source port number.

Destination Port: 16 bits

    The destination port number.

Sequence Number: 32 bits

    The sequence number of the first data octet in this segment (except
    when SYN is present). If SYN is present the sequence number is the
    initial sequence number (ISN) and the first data octet is ISN+1.

Acknowledgment Number: 32 bits

    If the ACK control bit is set this field contains the value of the
    next sequence number the sender of the segment is expecting to
    receive.  Once a connection is established this is always sent.

Data Offset: 4 bits

    The number of 32 bit words in the TCP Header.  This indicates where
    the data begins.  The TCP header (even one including options) is an
    integral number of 32 bits long.

Reserved: 6 bits

    Reserved for future use.  Must be zero.

Control Bits: 6 bits (from left to right):

    URG:  Urgent Pointer field significant
    ACK:  Acknowledgment field significant
    PSH:  Push Function
    RST:  Reset the connection
    SYN:  Synchronize sequence numbers
    FIN:  No more data from sender

Window: 16 bits

    The number of data octets beginning with the one indicated in the
    acknowledgment field which the sender of this segment is willing to
    accept.

Checksum: 16 bits

    The checksum field is the 16 bit one's complement of the one's
    complement sum of all 16 bit words in the header and text.  If a
    segment contains an odd number of header and text octets to be
    checksummed, the last octet is padded on the right with zeros to
    form a 16 bit word for checksum purposes.  The pad is not
    transmitted as part of the segment.  While computing the checksum,
    the checksum field itself is replaced with zeros.

Urgent Pointer: 16 bits

    This field communicates the current value of the urgent pointer as a
    positive offset from the sequence number in this segment.  The
    urgent pointer points to the sequence number of the octet following
    the urgent data.  This field is only be interpreted in segments with
    the URG control bit set.

You can also check my other post on IP header fields: https://admin-ahead.com/forum/general-discussion/ipv4-packet-header-fields-an-overview/

Thank you for reading.
« Last Edit: April 28, 2018, 02:36:08 pm by Vineesh K P »