Admin-Ahead Community
Windows => General Windows => Topic started by: Aby on July 29, 2014, 02:56:16 pm
-
What is socket pooling?
Socket pooling causes Internet Information Services (IIS) to listen to all IP addresses, and this can present a possible security risk for secure domains with multiple networks. Also, bandwidth throttling and performance adjustments apply to all Web sites configured for the same port (for example, port 80). If bandwidth throttling or performance tuning is being done on a per-site basis, socket pooling must be disabled.
Because DisableSocketPooling is defined as a valid property in the IIS 6.0 metabase schema (MBSchema.xml), you can still set this property by using Adsutil.vbs, but this has no effect. The functionality in IIS 6.0 is part of the new kernel level driver HTTP.sys. To configure HTTP.sys, you must use Httpcfg.exe.
To disable socket pooling, follow these steps:
1) Open a command prompt and make sure you are in the X:\Inetpub\Adminscripts folder (where X is the IIS installation drive). To do this, type the following lines at the command prompt:
X:
CD\Inetpub\Adminscripts
2) After you open the Adminscripts folder, type the following line at the command prompt:
cscript adsutil.vbs set w3svc/disablesocketpooling true
3) The command replies as follows:
disablesocketpooling : (BOOLEAN) True
4) Stop and start the IIS Admin service.
5) Restart the WWW service.
====