How to authenticate in Windows Active Directory
1. Install likewise
$ sudo -i
<Ubuntu 12.04 LTS>
# apt-get install likewise-open
# vi /etc/nsswitch.conf
Modify following line
FROM:
hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4
TO:
hosts: files dns mdns4_minimal [NOTFOUND=return] mdns4
# vi /usr/share/likewise-open/config/lsassd.reg
FROM:
"AssumeDefaultDomain"=dword:00000000
TO:
"AssumeDefaultDomain"=dword:00000001
# lwregshell import /usr/share/likewise-open/config/lsassd.reg
# lw-refresh-configuration
--------------------------------------------------------------------------------
<Ubuntu 10.04 LTS>
# add-apt-repository ppa:likewise-open/likewise-open-ppa
# apt-get update
# apt-get install likewise-open
-->Kerberos setting is blank
# vi /etc/nsswitch.conf
Modify following line
FROM:
hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4
TO:
hosts: files dns mdns4_minimal [NOTFOUND=return] mdns4
# vi /etc/likewise-open/lsassd.reg
Modify following line
FROM:
"AssumeDefaultDomain"=dword:00000000
TO:
"AssumeDefaultDomain"=dword:00000001
# lwregshell import /etc/likewise-open/lsassd.reg
# lw-refresh-configuration
--------------------------------------------------------------------------------
[b]2. Enable sudo[/b]
# vi /etc/sudoers.d/likewise
-->%domain^users ALL=(ALL) ALL
# chmod 440 /etc/sudoers.d/likewise
When the VMs were deployed in Linux Pool. Execute following command in each VMs.
# domainjoin-cli join <FQDN Domain> domain-join-user
Input domain join user's password.
If following message was appeared, domain join is successful.
SUCCESS
You should reboot this system before attempting GUI logins as a domain user.
Then reboot.
# reboot
